Polymagnet Demo Kit

The Polymagnet Demo Kit is the perfect way to get an introduction to the range of Polymagnet functions in the Polymagnet Catalog. The Polymagnet Demo Kit is available for sale now from the following partners:

 

The Polymagnet Demo Kit can be used to demonstrate the following functions:

 

Here is an overview video of the Polymagnet Demo Kit.

 

The Polymagnet Demo Kit contains the following demonstrators:

  1. Attach Polymagnet demonstrator #1 (orange knob)
  2. Attach Polymagnet demonstrator #2 (red knob)
  3. Align Polymagnet demonstrator (green knob and base)
  4. Latch Polymagnet demonstrator ( black knob and base)
  5. Spring Polymagnet demonstrator (black demonstrator)
  6. Complex Polymagnet demonstrator (blue knob and base)
  7. Standard magnet demonstrator (beige knob and base)
  8. A piece of 0.31” steel
  9. A piece of green magnetic viewing film for magnetic field visualization

All of the Polymagnets in the Polymagnet Demo Kit are 1” OD x 0.125” thick and made of N40 grade NIB.

  • Robert Johnson

    Using this technology, would it be possible to create a levitating floor, using the attract/repel properties?
    For instance, the floor in a room would be programmed to repel the sub-floor below it. Instead of a post running up the center of the two magnets, a series of magnets could be built into the walls around the floor to repel the floor back to the center of the room, maybe keeping it a fraction of an inch away from each wall. Such a room could prevent vibrations, from outside from entering the room, or at least attenuate them greatly.

    I had a dream about doing this one night. Instead of using programmable magnets, we just used hundreds of 4″ x 2″ n52 magnets. We mounted them on the bottom side of our floor, and did the same to the sub floor below. Could this work?